Saving 20% energy without reducing comfort is the promise of home automation in new homes. Heating, hot water, lighting, summer comfort, save money without thinking about it.
Integrating home automation into new homes from the start of the project will drastically reduce your energy consumption. The heating of the house and the production ofHot water represent 60% of the expenses in a new house. If the houses built today according to the precepts of RT 2012 consume little energy compared to old buildings, the price of energy continues toincrease. With solutions from automation, you only consume the energy you need, when you need it, where you need it, without losing comfort and without thinking about it.
Home automation in new homes to maintain the right temperature
The regulation controls the heat production
Neither too hot nor too cold. There regulation maintains the ambiance of a room chosen temperature. Central heating or independent radiators come on as soon as the temperature drops. A system that works with a room thermostat that communicates with the boiler or the radiator. A good way to avoid waste.
Home automation in new homes: first step the room thermostat
Placed in the main room within easy reach, it measures the temperature in a room and acts on theheat emitter. In a central heating installation, the thermostat communicates with the boiler or the heat pump to set the temperature of the water in the circuit.
Convectors, radiators and electric towel rails usually have a built-in thermostat. It is the latter that allows the transmitter to turn on or off depending on the set temperature.
Outdoor sensors to adapt to the South-West climate
In addition to the interior regulation, it is also possible to install a probe outside of the House. Equipment that therefore makes it possible to anticipate the cooling of the accommodation and to act accordingly. This system will be particularly suitable for large volumes or when one has a heating floor. Less responsive than an electric heater, it takes a little longer to heat up the house. He will therefore need to anticipate the needs to maintain an optimal temperature in the house.
Install additional thermostatic valves
They are installed on hot water radiators in a central heating system. They act directly on the radiator by closing or opening the water supply depending on the temperature of the room. Thus each room of the house can have a different atmosphere, even in central heating.
What are the ideal temperatures in a Southwest home?
The building code considers that 19°C is the ideal temperature in the living rooms. At night, the rooms can even be much cooler. Well snuggled up under the duvet, we can easily withstand a lower temperature of 17°C.
Heating regulation is therefore a home automation equipment new house essential, because going from 20 to 19°C represents 7% less energy spent!
Comfort is also at the rendezvous since the heat delivered is constant.
Heating that follows our little habits
Home automation in new homes for a home that heats up at the right time
No need to heat the house when you're not there or when you sleep. In programming your heating according to our lifestyle, energy savings are at the rendezvous. Ideal complement of a regulation, the programming can be hourly, annual or weekly. Depending on the needs, defined in advance, it switches off the equipment or lowers the set point levels during periods of unoccupancy.
Heating that follows the scenario
It is thus easy to establish several scenarios by the day or by the week. A warm and cozy house when everyone is home in the morning and evening. A lower temperature during the day when everyone is at work and at night when you are warm in bed. The house heats up on its own a few minutes before you wake up and your comfort is thus preserved. Similarly, there is no need to heat a bathroom all day when you spend very little time there at specific times. Programming will heat the room at the right time for maximum comfort.
Home automation in new homes adapted to second homes in the South-West
Similarly, a weekly or monthly schedule will allow you to anticipate holiday and weekend periods but still benefit from a warm and welcoming home upon your return.
Conversely, it will be easy for you, in a second home, to schedule your arrival for a house that seems to be waiting for you. Especially since today, there are solutions to control the whole remotely.
To go further, and discover home automation trends, see our article building a new house with home automation: the 5 trends of the moment
Prioritize the operation of the water heater during off-peak hours
Instead of saving energy, it is possible to use time programming to reduce your energy bill. This involves adapting the operation of electrical appliances according to the EDF tariffs. The heating and the hot water tank therefore set off as a priority during the off-peak hours.
Likewise, it is possible to program your water heater so that it goes into standby during your absence (weekends and holidays) and starts up again when you return.
Automatic light is more convenient
With home automation, as soon as there is sufficient daylight, the lamps turn off automatically. An ideal complement to light fixtures installed in the new house. Another possibility to install presence detector who will be able to turn off the lights as soon as you leave the room. Also ideal in the garden to provide spot lighting when you need it.
Home automation and ventilation
It is once again the CO2 detectors, presence, or humidity that allow your installation to operate at the right time. Pollutant sensors (formaldehyde, CO2, etc.) can also be connected to the monitoring system. ventilation, to optimize ventilation flows depending on the room. Similarly, it will be possible to operate its ventilation in holiday mode to save energy in the event of absence while letting the house breathe.
Home automation in new homes to keep a cool house without air conditioning in the South West
Finally, to maximize energy savings, home automation can also control all the equipment in sunscreen. lower a store, closing the shutters are gestures that can be done automatically depending on the course of the sun. A good way to avoid overheating the house in summer, without effort.
Connected equipment
While all the objects in the house seem to want to be connected, more and more consumer solutions are emerging. The control of all these devices is centralized on the smartphone, tablet or PC. A way to be able to take the remote home control with dedicated and easy-to-use software and applications. Today, these solutions are very simple to install and use.
Equipment that will help or accompany you all recommended actions today to reduce his electricity bill.
